鲍鱼直播_鲍鱼直播盒子_鲍鱼直播app下载

您好！歡迎閱覽沈陽金閣閣燈光音響有限公司官方網站！ 關于我們 丨 產品中心
銷售熱線 座機：024-24120122 手機：15804043205???????????
位置：首頁 > > 產品展示
MGP
產品型號：
產品產地：
發布日期：2018-07-03
瀏覽次數：次
咨詢電話：024-24120122
關 鍵 詞：
下一個產品 上一個產品

詳細介紹

MGP32X / MGP24X Specifications

OutlineMGP32XMGP24X
Mixing capabilityMixing channels32 Line Inputs (24 mono and 4 stereo)24 Line Inputs (16 mono and 4 stereo)
GROUP4 GROUP Buses + ST Bus4 GROUP Buses + ST Bus
AUX6 AUX Sends + 2 FX Sends6 AUX Sends + 2 FX Sends
MATRIX1 Matrix out1 Matrix out
On-board processorsFX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)
I/OMic inputsMIC: 24 (INPUTS HPF: 100Hz 12dB/oct)MIC: 16 (INPUTS HPF: 100Hz 12dB/oct)
Phantom power48V phantom power per channel48V phantom power per channel
Line inputsLINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereoLINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo
Digital I/OUSB Device, iPod / iPhoneUSB Device, iPod / iPhone
General specificationsMGP32XMGP24X
Total harmonic distortion0.02% (20Hz-20kHz@ +14dBu)0.02% (20Hz-20kHz@ +14dBu)
Frequency response+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise levelEquivalent input noise-128 dBu Equivalent Input Noise-128 dBu Equivalent Input Noise
Residual output noise-94 dBu Residual Output Noise-94 dBu Residual Output Noise
Crosstalk-74dB @ 1kHz-74dB @ 1kHz
Power requirements100-240V 50Hz/60Hz100-240V 50Hz/60Hz
Power consumption86W max86W max
DimensionsW1,027mm (40.4")819mm (32.2")
H169mm (6.7")169mm (6.7")
D565mm (22.2")565mm (22.2")
Net weight19kg (41.9lb)15.5kg (34.2lb)

MGP16X / MGP12X Specifications

OutlineMGP16XMGP12X
Mixing capabilityMixing channels16 Line Inputs (8 mono and 4 stereo)12 Line Inputs (4 mono and 4 stereo)
GROUP4 GROUP Buses + ST Bus4 GROUP Buses + ST Bus
AUX2 AUX Sends + 2 FX Sends2 AUX Sends + 2 FX Sends
Input channel functionsCompressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelvingCompressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
On-board processorsFX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
I/OMic inputsMIC: 10MIC:6 (100Hz 12dB/oct)
Phantom power48V phantom power per channel48V phantom power per channel
Line inputsLINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereoLINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo
Digital I/OUSB Audio USB IN: iPod, iPhone exclusiveUSB Audio USB IN: iPod, iPhone exclusive
General specificationsMGP16XMGP12X
Total harmonic distortion0.02% (20Hz-20kHz@ +14dBu)0.02% (20Hz-20kHz@ +14dBu)
Frequency response+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz+0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz
Hum & noise levelEquivalent input noise-128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)-128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Residual output noise-102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)-102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum)
Crosstalk-74dB @ 1kHz-74dB @ 1kHz
Power requirements100-240V 50Hz/60Hz100-240V 50Hz/60Hz
Power consumption55W max45W max
DimensionsW447mm348mm
H143mm143mm
D495mm495mm
Net weight9.0kg7.5kg

Analog input specifications

Input terminalActual source
impedance		For use with
nominal		Input levelConnector
PADGAINSensitivity*1NominalMax.
before clip
MONO CH INPUT
MGP32X: 1–24
MGP24X: 1–16		0-60dB3kΩ50-600Ω
Mics		-80 dBu
(0.078 mV)		-60 dBu
(0.775 mV)		-40 dBu
(7.75 mV)		XLR-3-31 type*2
Phone jack*4
-16dB-36 dBu
(12.3 mV)		-16 dBu
(123 mV)		+4 dBu
(1.23 V)
26dB-34dB600Ω
Lines		-54 dBu
(1.55 mV)		-34 dBu
(15.5 mV)		-14 dBu
(155 mV)		Phone jack*3
+10dB-10 dBu
(245 mV)		+10 dBu
(2.45 V)		+30 dBu
(24.5 V)
STEREO CH INPUT
MGP32X: 25–32
MGP24X: 17–24		-34dB10kΩ600Ω
Lines		-54 dBu
(1.55 mV)		-34 dBu
(15.5 mV)		-14 dBu
(155 mV)		Phone jack*4
RCA Pin Jack
+10dB-10 dBu
(245 mV)		+10 dBu
(2.45 V)		+30 dBu
(24.5 V)
MONO CH INSERT INPUT
MGP32X: 1–24
MGP24X: 1–16		10kΩ600Ω
Lines		-20 dBu
(77.5 mV)		0 dBu
(0.775 V)		+20 dBu
(7.75 V)		Phone Jack*5
ST CH INSERT INPUT L,R10kΩ600Ω
Lines		-20 dBu
(77.5 mV)		0 dBu
(0.775 V)		+20 dBu
(7.75 V)		Phone Jack*5
TALKBACK INPUT10kΩ50-600Ω
Mics		-66 dBu
(0.389 mV)		-50 dBu
(2.45 mV)		-30 dBu
(24.5 mV)		XLR-3-31 type*6

0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.

Analog output specifications

Output terminalActual source
impedance		For use with
nominal		Output levelConnector
NominalMax. before clip
ST OUT [L,R]75Ω600Ω Lines+4 dBu
(1.23 V)		+24 dBu
(12.3 V)		XLR3-32 type*1
Phone jack*4
MONO OUT75Ω600Ω Lines+4 dBu
(1.23 V)		+24 dBu
(12.3 V)		XLR3-32 type*1
GROUP OUT (1-4)150Ω10kΩ Lines+4 dBu
(1.23 V)		+20 dBu
(7.75 V)		Phone jack*2
AUX SEND (1-6)75Ω600Ω Lines+4 dBu
(1.23 V)		+24 dBu
(12.3 V)		XLR3-32 type*1
MATRIX OUT (1, 2)150Ω10kΩ Lines+4 dBu
(1.23 V)		+20 dBu
(7.75 V)		Phone jack*2
MONO CH INSERT OUT
MGP32X: 1–24
MGP24X: 1–16		75Ω10kΩ Lines0 dBu
(0.775 V)		+20 dBu
(7.75 V)		Phone jack*3
ST CH INSERT OUT [L,R]75Ω10kΩ Lines0 dBu
(0.775 V)		+20 dBu
(7.75 V)		Phone jack*3
MONITOR OUT [L,R]150Ω10kΩ Lines+4 dBu
(1.23 V)		+20 dBu
(7.75 V)		Phone jack*2
PHONES OUT150Ω40Ω Phones3mW75mWST Phone Jack

0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)